A garage door offers security and convenience for your possessions and your home. This is why when yours malfunctions, it can be very frustrating. While some garage door issues are best left to the experts, there are some that are easy to fix. Here’s a list of the common DIY repair issues and their potential solutions.
- The Garage Door Fails To Close Completely
It is not uncommon for your garage door to open correctly but fail to close all the way. There are a few reasons for this:
- The close-limit switch was set wrong preventing the door from closing or making it reverse when it is pulled up. In this case, the set-limit switch needs adjusting. Different doors have different techniques for adjusting. For the most part, it is a screw feature located on the motor unit which can be turned depending on how far the door needs to descend.
- The safety sensors are out of alignments thereby blocking the sightline between the electronic eyes. To fix it, ensure that the sight path between these electronic eyes is clear by removing debris or realigning the brackets holding the sensors.
- Damaged or rusted rollers: these can cause your garage door to get stuck in the tracks. Simply replace any damaged rollers and if they are rusted, lubricate them with a silicone lubricant.
- The Garage Door Won’t Open All The Way
Apart from not closing all the way, a garage door may fail to open completely as well. This is mostly an issue in the distance between the up-limit switch and the motor unit. If the switch is too far away from the motor, moving it closer will do the trick. Damaged and balky rollers can also cause your door to open midway. If this is the scenario, lubricate rusty rollers and replace damaged ones.
- The Door Pulls Back Up After Hitting The Floor
If your door develops a habit of reversing as soon as it hits the floor, this could indicate an issue with the close-force setting. If the setting is not right, the amount of friction that the door should experience before shutting the motor changes. This may send the message to the motor that it needs to stop. The solution here is to confirm that the close-force settings are set correctly. Damaged rollers can also add to the friction and elevate or cause the problem. Replace or lubricate your rollers every so often.
- The remote won’t respond
When your garage door refuses to respond after hitting the button on your remote, try the following:
- Ensure you are using the remote while you are in range.
- Replace the batteries on the remote and try again. If moving closing to your door doesn’t change anything, use the wall switch to open and close the door. If it responds, your remote may be the problem, which may mean your batteries are dead.
- Replace your remote once and for all. If the above fixes don’t resolve the problem, it might be time to replace your remote control.
A garage door is a highly mechanical product. Therefore, when it stops working, it is always a mechanical issue of some sort. Thankfully, you can get it up and working by implementing the above tips. If yours won’t budge after doing all you can, it might be time to take it for garage door repair in Vaughan. Expert advice will certainly do the trick.